Yamaha Grizzly 300, Руководство пользователя

Страница: 23 / 146

4-2
4
Indicator lights and warning light
2. Neutral indicator light “N”
3. Reverse indicator light “R”
1. Coolant temperature warning light “ ”
NOTICE
The engine may overheat if the ATV is over-
loaded. In this case, reduce the load to spec-
ification.
Reverse indicator light “ ”
This indicator light comes on when the transmis-
sion is in the reverse position.
Start the engine after making sure that the
warning light is out. Continuous use while
the warning light is on may cause damage to
the engine.
The engine may also overheat if mud or dirt
has accumulated on the radiator (i.e., after
riding in wet terrain).
1 2 3
Neutral indicator light “ ”
This indicator light comes on when the transmis-
sion is in the neutral position.
Coolant temperature warning light “ ”
This warning light comes on when the engine over-
heats. When this occurs during operation, stop the
engine as soon as it is safe to do so and allow it to
cool down for about 10 minutes.
The electrical circuit of the warning light can be
checked by turning the key to “ ” (on). The warn-
ing light should come on for a few seconds, and
then go off.
If the warning light does not come on initially when
the key is turned to “ ” (on), or if the warning light
remains on, have a Yamaha dealer check the elec-
trical circuit.