manualshive.com logo in svg

Yamaha GRIZZLY 125, Руководство пользователя

Поделиться
Скачать
Yamaha GRIZZLY 125 Скачать руководство пользователя страница 64

 

7-18

 

1

2

3

4

5

6

7

8

9

10

11

 

EWB01090 

 

It is important when climbing a hill to make sure
that your weight is transferred forward on the ATV.
This can be accomplished by leaning forward and,
on steeper inclines, standing on the footboards
and leaning forward over the handlebars.

 

EWB01180 

WARNING

 

POTENTIAL HAZARD
Operating on excessively steep hills.
WHAT CAN HAPPEN
The ATV can overturn more easily on ex-
tremely steep hills than on level surfaces or
small hills.
HOW TO AVOID THE HAZARD
Never operate the ATV on hills too steep for
the ATV or for your abilities. Practice on
smaller hills before attempting large hills.

WARNING

 

POTENTIAL HAZARD
Climbing hills improperly.
WHAT CAN HAPPEN
Could cause loss of control or cause the ATV
to overturn.

HOW TO AVOID THE HAZARD
Always follow proper procedures for climb-
ing hills as described in this Owner’s Manual.
Always check the terrain carefully before you
start up any hill.
Never climb hills with excessively slippery or
loose surfaces.
Shift your weight forward.
Never open the throttle suddenly. The ATV
could flip over backwards.
Never go over the top of any hill at high
speed. An obstacle, a sharp drop, or another
vehicle or person could be on the other side
of the hill.

Содержание GRIZZLY 125



















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды