manualshive.com logo in svg

Yamaha GRIZZLY 125, Руководство пользователя

Поделиться
Скачать
Yamaha GRIZZLY 125 Скачать руководство пользователя страница 36

 

5-5

 

1

2

3

4

5

6

7

8

9

10

11

 

EBU19781

 

Tires 

 

EWB00561 

WARNING

 

POTENTIAL HAZARD
Operating this ATV with improper tires, or
with improper or uneven tire pressure.
WHAT CAN HAPPEN
Use of improper tires on this ATV, or opera-
tion of this ATV with improper or uneven tire
pressure, may cause loss of control, increas-
ing your risk of accident.
HOW TO AVOID THE HAZARD

 

●

 

The tires listed below have been approved
by Yamaha Motor Co., Ltd. for this model.
Other tire combinations are not recom-
mended.

Front:

Manufacturer/model:

DUNLOP/KT536A

Size:

AT20 x 7-8

Type:

Tubeless

Rear:

Manufacturer/model:

DUNLOP/KT537A

Size:

AT22 x 10-8

Type:

Tubeless

 

●

 

The tires should be set to the recommend-
ed pressure:

Recommended tire pressure:

Front:

20.0 kPa (2.9 psi) (0.20 kgf/cm

 

2

 

)

Rear:

25.0 kPa (3.6 psi) (0.25 kgf/cm

 

2

 

)

 

●

 

Check and adjust tire pressures when
the tires are cold.

 

●

 

Tire pressures must be equal on both
sides.

Содержание GRIZZLY 125



















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды