manualshive.com logo in svg

Yamaha GRIZZLY 125, Руководство пользователя

Поделиться
Скачать
Yamaha GRIZZLY 125 Скачать руководство пользователя страница 21

 

4-3

 

1

2

3

4

5

6

7

8

9

10

11

 

EBU18090

 

Start switch “START” 

 

Push this switch to crank the engine with the start-
er.

CAUTION:

 

ECB00050 

 

See the starting instructions on page 6-1 prior

 

to starting the engine.

 

EBU18140

 

Light switch “LIGHTS” 

 

Set this switch to “LO” to turn on the low beams
and the taillight. Set the switch to “HI” to turn on the
high beams and the taillight. Set the switch to
“OFF” to turn off all the lights.

CAUTION:

 

ECB00040 

 

Do not use the headlights with the engine
turned off for an extended period of time, oth-
erwise the battery may discharge to the point
that the starter motor will not operate properly.
If this should happen, remove the battery and

 

recharge it.

 

EBU18270

 

Throttle lever 

 

Once the engine is running, movement of the throt-

tle lever will increase the engine speed.
Regulate the speed of the ATV by varying the
throttle position. Because the throttle is spring-
loaded, the ATV will decelerate, and the engine will
return to an idle any time the hand is removed from
the throttle lever.

Before starting the engine, check the throttle to be
sure it is operating smoothly. Make sure it returns
to the idle position as soon as the lever is released.

 

1. Throttle lever

1

Содержание GRIZZLY 125



















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды