Yamaha GP1300R WaveRunner 2003 Скачать руководство пользователя страница 99

Страница: 99 / 126

4-13

EJU18891

Inspecting the jet thrust nozzle
angle

Check for smooth operation of the handle-

bars and jet thrust nozzle.

Turn the handlebars as far as possible to

the right and left and check that the differ-
ence of distances A and B between the jet
thrust nozzle and the nozzle is within specifi-
cation.

If steering is stiff or misadjusted, have a

Yamaha dealer service it.

Difference of A and B:

Maximum 5 mm (0.20 in)

EJU11040

Inspecting and adjusting the
throttle cable

Check that the throttle cable moves back

to the set position smoothly and that free
play is within specification.
1. Squeeze and release the throttle lever. If

the lever does not return smoothly, have
a Yamaha dealer service it.

2. Adjust free play

by loosening the lock-

nut

and turning the adjuster

Throttle lever free play:

4–7 mm (0.16–0.28 in)

E_F1G10.book Page 13 Tuesday, July 12, 2005 10:26 AM

Содержание GP1300R WaveRunner 2003































































































































Результаты поиска

Содержание GP1300R WaveRunner 2003

Отзывы:

Yamaha GP1300R WaveRunner 2003, Руководство владельца/оператора, Страница: 99 / 126

Результаты поиска

Содержание GP1300R WaveRunner 2003

Отзывы: