Yamaha GP1300R WaveRunner 2003 Скачать руководство пользователя | Manualshive

Страница: 82 / 126

background image

3-32

E

EJU10810

Beaching the watercraft

1. Make sure no obstructions, boats or

swimmers are near the beach. Release
the throttle lever about 125 m (410 ft)
before you reach the intended beaching
area.

2. Approach the beach slowly and stop the

engine before reaching land.
Remember: you need throttle to steer.

3. Get off the watercraft and pull it up on

the beach.

CAUTION:

@

Small pebbles, sand, seaweed, and other
debris can be pulled into the jet intake
and impair or damage the impeller.
Always stop the engine and get off
before beaching the watercraft.

@

EJU10820

Docking the watercraft

1. Make sure that no obstructions, boats or

swimmers are close to the watercraft.
Reduce speed about 125 m (410 ft)
away from the dock.

2. Slowly approach the dock and stop the

engine just before coming alongside it.

EJU10830

Rough water operation

The force of landing after jumping can

cause a strong impact on both the watercraft
and the operator and passenger. It is possi-
ble for the operator to hit his or her chest or
jaw on the watercraft body or handlebars
and be injured. Do not operate the water-
craft with your chin right above the handle-
bars or with your feet outside the watercraft.
Operating in rough water or jumping waves
can also crack the watercraft body or dam-
age internal parts. Avoid operating in rough
water or bad weather conditions.

E_F1G10.book Page 32 Tuesday, July 12, 2005 10:26 AM

«
...
80
81
82
83
84
...
»

Содержание GP1300R WaveRunner 2003































































































































Отзывы:

Нет отзывов

Похожие инструкции для GP1300R WaveRunner 2003

Бренд: Malibukayaks Страницы: 19

Бренд: Oru Kayak Страницы: 21

Бренд: Ocean Yachts Страницы: 50

NARAK CROSS 405

Бренд: Nautiraid Страницы: 16

Mirage Inflatables

Бренд: Hobie Страницы: 2

Бренд: Stand Up Floats Страницы: 4

Бренд: LaserPerformance Страницы: 22

Бренд: Hunter Страницы: 28

Бренд: YAMARIN Страницы: 36

Бренд: Walker Bay Страницы: 8

MERRY FISHER 725 HB

Бренд: Jeanneau Страницы: 102

Бренд: Yamaha Страницы: 122

Бренд: 3d Страницы: 17

Бренд: PATHFINDER Страницы: 28

Бренд: Advanced Elements Страницы: 16

ODC 420 Outdoor Discovery Craft

Бренд: Creek Company Страницы: 2

OUTDOOR DISCOVERY CRAFT ODC SUPERSPORT XR

Бренд: Creek Company Страницы: 4

ODC 616 OUTDOOR DISCOVERY CRAFT

Бренд: Creek Company Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды