Yamaha GP1300R WaveRunner 2003 Скачать руководство пользователя страница 114 | Manualshive

Страница: 114 / 126

Yamaha GP1300R WaveRunner 2003 Скачать руководство пользователя страница 114

5-4

E

EJU11180

Emergency procedures

EJU21602

Cleaning the jet intake and
impeller

If weeds or debris get caught in the intake

or impeller, cavitation can occur, causing jet
thrust to decrease even though engine
speed rises. If this condition is allowed to
continue, the engine will overheat and may
seize. If there is any sign that the jet intake
or impeller is clogged with weeds or debris,
return to shore and check the intake and
impeller. Always stop the engine before
beaching the watercraft.

WARNING

@

Before attempting to remove weeds or
debris from the jet intake or impeller
area, shut the engine off and remove the
clip from the engine shut-off switch.
Severe injury or death could result from
coming in contact with the rotating parts
of the jet pump.

@

CAUTION:

@

If weeds or debris get caught in the
intake, do not operate the watercraft
above trolling speed until they have been
removed.

@

1. Turn the watercraft on its side as shown.

CAUTION:

@

●

Place a suitable clean cloth or carpet-
ing underneath the watercraft to pro-
tect it from abrasions and scratches.

●

Always turn the watercraft over onto
its port (left) side.

●

When turning the watercraft on its
side, support the bow so the handle-
bars cannot be bent or damaged.

@

E_F1G10.book Page 4 Tuesday, July 12, 2005 10:26 AM

«
...
112
113
114
115
116
...
»

Содержание GP1300R WaveRunner 2003































































































































Отзывы:

Нет отзывов