Yamaha FZ-16, Руководство по обслуживанию

Страница: 201 / 267

TRANSMISSION
INSPECTION OF FORKS
CHANGES
The following procedure applies to all
changes forks.
1. Check:
Cam pin of the yoke of change "1"
Clips shift fork "2"
Curves / damage / stretch marks / wear Replace
the fork of the changes.
l
l
INSPECTION OF CHANGE DRUM
1.
Check:
S urcos changes in the drum
Damage / scratches / wear Replace
drum changes.
Segment of the drum change "1"
Damage / wear Replace the drum
the c HANGES.
Bearing drum changes "2"
Damage / pitting Replace drum
the c HANGES.
l
l
l
2.
Check:
B arra fork guide changes
Guide bar Roll the shift fork
on a flat surface.
Replace curves.
l
WARNING
Do not attempt to straighten a guide bar
bent shift fork.
INSPECTION OF TRANSMISSION
1.
Measure:
Deformation of the shaft main
(With a centering device and the indicator
cover of "1")
Replace specification outside the shaft
principal.
l
Shaft limit deformation main
0.03 mm
3.
Check:
Fork movement changes
(Moving along the guide bar
of the shift fork)
Replace harsh fork movement
changes and fork guide bar
changes as a whole.
l
2.
Measure:
Deformation of the coupling pin
(With a centering device and the indicator
cover of "1")
Replace specification outside the shaft
traction.
l
Shaft limit deformation
Traction
0.03 mm
5-64