Yamaha FZ-16, Руководство по обслуживанию

Страница: 188 / 267

PINION BALANCER
PINION BALANCER DRIVEN GEAR ASSEMBLY
PRIMARY BALANCER
1.
Assembly:
•
Pin pin "1"
•
Spring "2"
(With the glass top)
NOTE:
1.
Loosen:
•
Primary drive gear nut "1"
NOTE:
Place a sheet of leather or a leather
"A" between the primary drive gear
balancer "2" and engranaj and led
primary balancer "3", and then loosen the
primary drive gear nut.
2
3
Install the pins and springs alternatively
as shown.
1
to
1
2
2.
Assembly:
•
Glass ceiling "1"
•
Primary driven gear Balancer "2"
NOTE:
2. Straighten the lock washer.
3. Loosen:
•
The primary driven gear nut
balancer "1"
NOTE:
Place an aluminum plate "a" between the
primary drive gear Balancer "2"
and the primary driven gear Balancer
"3", and then loosen the nut on the gear
primary driven balancer.
Align the punch mark "a" in the glass ceiling
with the punch mark "b" in the gear
primary driven balancer.
2
to
1
1
3
INSPECTION PINION GEARS
THE BALANCER AND GEAR
PRIMARY DRIVER
1.
Check:
•
Primary drive gear Balancer
•
Primary driven gear Balancer
•
Cup top
•
Spring
•
Dowel pin
Cracks / damage / wear Replace.
2. Check:
•
Primary drive gear
See " INSPECTION
PRIMARY DRIVE GEAR "In
page 5-39.
b2a
MOUNT THE GEARS
BALANCER AND GEAR
PRIMARY DRIVER
1.
Install:
•
Primary drive gear
Balancer "1"
•
Lockwasher
New
•
Primary driven gear
Balancer "2"
• primary driver gear
•
Washer "3"
•
Nut primary driven gear
balancer
Primary drive gear nut
•
NOTE:
•
Align the punch mark "a" in the gear
primary driver of the balancer with the brand
Punch "b" in the primary driven gear
balancer "1".
•
Make sure the corners with sharp edges
of the thrust washer "c" is placed next
opposite the primary drive gear.
5-51