Yamaha FZ-07 2016, Руководство пользователя

Страница: 23 / 112

Instrument an d control functions
4-5
4
WARNING
EWA12423
Be sure to stop the vehicle b efore
makin g any settin g chan g es to the
multi-function meter unit. Chan g in g
settin g s while ri d in g can d istract the
operator an d increase the risk of an
acci d ent.
TIP
Except when accessing the brightness
control mode or when displaying the
clock, the key must be turned to “ON”
before you can use the left and right set
buttons to adjust the multi-function
meter.
Spee d ometer
The speedometer shows the vehicle’s
traveling speed.
Tachometer
The tachometer allows the rider to
monitor the engine speed and keep it
within the ideal power range.
NOTICE
ECA10032
Do not operate the en g ine in the ta-
chometer re d zone.
Re d zone: 10000 r/min an d a b ove
Clock
The clock uses a 12-hour time system.
When the main switch is not in the
“ON” position, the clock can be viewed
for 10 seconds by pushing the left set
button.
To set the clock
1. Turn the key to “ON”.
2. Push the left set button and right
set button together for two sec-
onds. The hour digits will start
flashing.
3. Use the right set button to set the
hours.
4. Push the left set button, and the
minute digits will start flashing.
1. Tachometer
2. Tachometer red zone
1 2
1. Clock
1
UBU270E0.book Page 5 Monday, November 14, 2016 8:53 AM