Yamaha FJR1300N Скачать руководство пользователя страница 39

Страница: 39 / 50

INSTRUMENT AND CONTROL FUNCTIONS

3-18

CD-01E

With the engine turned off:
1. Move the sidestand down.
2. Make sure that the engine stop switch is set to “

”.

3. Turn the key to “ON”.
4. Shift the transmission into the neutral position.
5. Push the start switch.
Does the engine start?

The neutral switch may be defective.
The motorcycle should not be ridden until
checked by a Yamaha dealer.

With the engine still running:
6. Move the sidestand up.
7. Keep the clutch lever pulled.
8. Shift the transmission into gear.
9. Move the sidestand down.
Does the engine stall?

After the engine has stalled:
10. Move the sidestand up.
11. Keep the clutch lever pulled.
12. Push the start switch.
Does the engine start?

The sidestand switch may be defective.
The motorcycle should not be ridden until
checked by a Yamaha dealer.

The clutch switch may be defective.
The motorcycle should not be ridden until
checked by a Yamaha dealer.

NOTE:

This check is most reliable if performed with
a warmed-up engine.

YES

The system is OK. The motorcycle can be ridden.

YES

E_5jw.book Page 18 Friday, March 30, 2001 2:14 PM

Содержание FJR1300N



















































Результаты поиска

Содержание FJR1300N

Отзывы:

Похожие инструкции для FJR1300N

Бренды по названию

Популярные бренды

Yamaha FJR1300N, Руководство пользователя

Результаты поиска

Содержание FJR1300N

Отзывы:

Похожие инструкции для FJR1300N

Бренды по названию

Популярные бренды