Yamaha Fazer, Руководство по обслуживанию

Страница: 28 / 213

SPEC
TIGHTENING TORQUE (CHASSIS)
MAINTENANCE SPECIFICATIONS
2-12
PARTS TO BE TIGHTENED THREAD TIGHTENING TORQUE
SIZE Nm m.kg ft.lb
Front Engine Stay and Mount M 8 X 1.25 38 3.8 27.5
Front Engine Stay and Frame M 10 X 1.25 55 5.5 40
Rear Engine Mount and Frame M 8 X 1.25 38 3.8 27.5
Upper Engine Stay and Mount M 8 X 1.25 38 3.8 27.5
Upper Engine Stay and Frame M 8 X 1.25 38 3.8 27.5
Front Lower Engine Mount and Frame M 8 X 1.25 38 3.8 27.5
Handle Crown and Inner Tube M 8 X 1.25 23 2.3 17
Handle Crown and Steering Shaft M 10 X 1.25 35 3.5 25
Under Bracket and Inner Tube M 10 X 1.25 28 2.8 20
Steering Shaft and Ring Nut M 25 X 1.25 23 2.3 17
Handle Crown and Handle M 8 X 1.25 23 2.3 17
Front Fender M 6 X 1.0 7 0.7 5.1
Speedometer Cable and Speedometer M 12 X 1.0 2.5 0.25 2
Handle Crown and Main Switch M 6 X 1.0 13 1.3 9.4
Front Wheel Axle Nut M 14 X 1.5 59 5.9 43
Rear Wheel Axle Nut M 14 X 1.5 91 9.1 66
Wheel Sprocket and Clutch Hub M 8 X 1.25 40 4.0 29
Tensioner Bar M 8 X 1.25 19 1.9 14
Camshaft Lever M 6 X 1.0 9.8 0.98 7.1
Fuel Cock M 6 X 1.0 7 0.7 5.1
Ignition Coil M 6 X 1.0 3.8 0.38 3
Battery Box M 6 X 1.0 3.8 0.38 3
Rear Fender M 6 X 1.0 3.8 0.38 3
Pivot Axle Nut M 12 X 1.25 59 5.9 43
Rear Shock Absorber M 10 X 1.25 40 4.0 29
Tension Bar and Rear Arm M 8 X 1.25 19 1.9 14
Side Stand M 8 X 1.25 25 2.5 18
Footrest and Frame M 8 X 1.25 23 2.3 17
Footrest Mounting Lower M 8 X 1.25 16 1.6 12
*
Note :
1. First tighten the Ring Nut approximately 33 Nm (3.3 m.kg 25 ft.lb) by using the torque
wrench then loosen the Ring Nut 1/4 turn.
2. Retighten the Ring Nut to specifications
*