Operation
39
4.
Pull out the choke knob fully.
5.
Pull the manual starter handle slowly until
you feel resistance. Then give a strong
pull straight out to crank and start the en-
gine.
6.
After the engine starts, slowly return the
manual starter handle to its original posi-
tion before releasing it.
7.
Slowly return the throttle grip to the fully
closed position.
8.
Return the choke knob to the home posi-
tion gradually.
TIP:
●
If the choke knob is left in the “
” (start)
position while the engine is running, the en-
gine will run poorly or stall.
●
When the engine is cold, for example, when
the ambient temperature is low in winter, it
needs to be warmed up. For further infor-
mation, see page 43.
●
Do not turn the throttle grip unnecessarily to
open and close the throttle before starting
the engine, otherwise the engine may be
difficult to start. If the engine is difficult to
start, place the throttle grip in the
“
” (warm engine) position and
try again.
Starting procedure (warm engine)
1.
Place the gear shift lever in neutral.
START
ZMU07886
ZMU02030
U6DR70E0.book Page 39 Thursday, December 6, 2012 9:14 AM
