Components
23
EMU26013
Choke knob for pull type
To supply the engine with the rich fuel mixture
required to start, pull out this knob.
EMU26074
Manual starter handle
The manual starter handle is used to crank
and start the engine.
EMU26091
Main switch
The main switch controls the ignition system;
its operation is described below.
●
“
”
(off)
With the main switch in the “
” (off) posi-
tion, the electrical circuits are off, and the key
can be removed.
●
“
”
(on)
With the main switch in the “
” (on) position,
the electrical circuits are on, and the key can-
not be removed.
●
“
”
(start)
With the main switch in the “
” (start) po-
sition, the starter motor turns to start the en-
gine. When the key is released, it returns
automatically to the “
” (on) position.
EMU26102
Power tilt switch
The power tilt system adjusts the outboard
motor angle in relation to the transom. Push-
ing the switch “
” (up) tilts the outboard mo-
tor up. Pressing the switch “
” (down) tilts
the outboard motor down. When the switch is
released, the outboard motor will stop in its
current position.
TIP:
For instructions on using the power tilt switch,
see pages 46 and 48.
1. Choke knob
1
ZMU07807
U6DR70E0.book Page 23 Thursday, December 6, 2012 9:14 AM
