manualshive.com logo in svg

Yamaha F9.9J, Руководство пользователя

Поделиться
Скачать
Yamaha F9.9J Скачать руководство пользователя страница 31

Components

25

EMU30530

Tilt lock mechanism

The tilt lock mechanism is used to prevent the
outboard motor from lifting out of the water
when in reverse gear.

To lock it, set the tilt lock lever in the lock po-
sition. To release, push the tilt lock lever in the
release position.

EMU26321

Tilt support knob

To keep the outboard motor in the tilted up po-
sition, push the tilt support knob under the
swivel bracket.

NOTICE

ECM00660

Do not use the tilt support lever or knob
when trailering the boat. The outboard mo-
tor could shake loose from the tilt support
and fall. If the motor cannot be trailered in

the normal running position, use an addi-
tional support device to secure it in the tilt
position.

EMU26333

Tilt support bar

The tilt support bar keeps the outboard motor
in the tilted up position.

NOTICE

ECM01660

Do not use the tilt support bar when traile-
ring the boat. The outboard motor could
shake loose from the tilt support and fall.
If the motor cannot be trailered in the nor-
mal running position, use an additional
support device to secure it in the tilt posi-
tion.

EMU26361

Power tilt unit

This unit tilts the outboard motor up and down
and is controlled with the power tilt switch.

NOTICE

ECM00630

Do not step on or exert pressure on the
power tilt motor. The power tilt unit could
be damaged as a result.

1. Tilt lock lever

1

ZMU07814

U6DR70E0.book  Page 25  Thursday, December 6, 2012  9:14 AM

Содержание F9.9J

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды