Trouble Recovery
90
●
There will be fuel in the fuel filter. Keep
away from sparks, cigarettes, flames or
other sources of ignition.
●
This procedure will allow some fuel to
spill. Catch fuel in a rag. Wipe up any
spilled fuel immediately.
●
The fuel filter must be reassembled
carefully with the O-ring, filter cup, and
hoses in place. Improper assembly or
replacement could result in a fuel leak,
which could result in a fire or explosion
hazard.
If the water separator-alert indicator on the
6Y8 Multifunction tachometer blinks, perform
the following procedure.
1.
Stop the engine.
2.
Remove the top cowling.
3.
Remove the plastic tie.
4.
Disconnect the water detection switch
coupler.
NOTICE:
Be careful not to get
any water on the water detection
switch coupler, otherwise a malfunc-
tion could occur.
[ECM01950]
5.
Unscrew the filter cup from the filter hous-
ing.
NOTICE:
Be careful not to twist the
water detection switch lead when un-
screwing the filter cup.
[ECM01960]
1. Water separator-alert indicator
1. Plastic tie
1. Water detection switch coupler
U6D779E0.book Page 90 Tuesday, November 15, 2011 2:33 PM
