![Yamaha F150A2 Скачать руководство пользователя страница 89](http://html1.mh-extra.com/html/yamaha/f150a2/f150a2_owners-manual_4161729089.webp)
Maintenance
83
TIP:
If a magnetic gear oil drain screw is
equipped, remove all metal particles from
the screw before installing it.
Always use new gaskets. Do not reuse the
removed gaskets.
4.
Remove the oil level plug and gasket to
allow the oil to drain completely.
NOTICE:
Check the used gear oil after
it has been drained. If the gear oil is
milky or contains water or a large
amount of metal particles, the gear
case may be damaged. Have a
Yamaha dealer check and repair the
outboard motor.
[ECM00714]
TIP:
For disposal of used oil, consult your Yamaha
dealer.
5.
Put the outboard motor in a vertical posi-
tion. Using a flexible or pressurized filling
device, inject the gear oil into the gear oil
drain screw hole.
6.
Put a new gasket on the oil level plug.
When the oil begins to flow out of the oil
level plug hole, insert and tighten the oil
level plug.
7.
Put a new gasket on the gear oil drain
screw. Insert and tighten the gear oil
drain screw.
EMU29317
Inspecting and replacing anode(s)
Yamaha outboard motors are protected from
corrosion by sacrificial anodes. Inspect the
external anodes periodically. Remove scales
from the surfaces of the anodes. Consult a
Yamaha dealer for replacement of external
anodes.
1. Gear oil drain screw
2. Oil level plug
3. Gasket
Recommended gear oil:
Yamalube Marine Gearcase Lube or
Hypoid gear oil
Recommended gear oil grade:
SAE 90 API GL-4
Gear oil quantity:
0.980 L (1.036 US qt, 0.862 Imp.qt)
Tightening torque:
9 Nm (0.92 kgf-m, 6.6 ft-lb)
Tightening torque:
9 Nm (0.92 kgf-m, 6.6 ft-lb)
U63P3FE0.book Page 83 Thursday, December 5, 2013 10:01 AM
©
2019 Yamaha Motor Corporation, U.S.A.