Selecting from the Panel
ELC-02/ELCU-M02 Owner’s Manual
45
4
Voi
ce Con
tro
ls
a
n
d Effects
NOTE
Depending on the reverb depth value (set by the slider), two
adjacent REVERB lamps may be lit at the same time, indicating
an intermediate position.
REVERB [Page 2]
1
TYPE
Determines the reverb type for each of the Voice sections
and the Organ Flute Voice.
Several types can be selected: Room, Hall, Stage, and so
on.
Pressing the TYPE button on the display calls up the
Reverb Type list.
Reference page
• Effect List (page 52)
The list contains many reverb types, more than can fit on
one display page. To change the display pages, press the
appropriate number buttons [1] or [2] in the display.
Select the desired reverb type from the list.
To abort the operation, press the [CLOSE] button.
After changing the reverb type, the TIME parameter
below is automatically changed corresponding to the
selected reverb type.
2
TIME
Determines the reverb length for each of the Voice
sections and the Organ Flute Voice.
Higher settings make the reverb effect longer.
Range:
0.3s – 30.0s
3
ORGAN
Determines the amount of reverb applied to the Organ
Flute Voice. This parameter corresponds to the REVERB
slider contained in the ATTACK/VOLUME Page of the
Organ Flute display.
Range:
0 – 24
Reference page
• Organ Flutes (page 38)
REVERB [Page 3]
Determines the amount of reverb effect applied to each
Voice section.
Each slider corresponds to the REVERB slider in Voice
Condition Page 1 of the respective Voices.
Range:
0 – 24
REVERB [Page 4]
1
TYPE
Determines the reverb type for rhythm, accompaniment,
keyboard percussion, and microphone signal.
Reference page
• Connecting a microphone (page 185)
2
TIME
Determines the length of reverb applied to the rhythm,
accompaniment, keyboard percussion, and microphone
signal.
Range:
0.3s – 30.0s
3
2
1
Press the number buttons to change the display pages.
3
2
4
1