Yamaha Electone EL-57, Руководство пользователя

Страница: 116 / 143

112
Rh
ythm Pr
ogr
am
8
2) Programming a Sequence
1
Select the type of rhythm you wish to enter, Preset or User.
Pressing these Data Control buttons
alternately selects Preset and User.
2
Select the desired rhythm by pressing the appropriate button in
the Rhythm section, then select SET in the display to enter the
pattern. (Refer to the Rhythm Pattern Number Table [on the
next page] for a list of the rhythms and their number
assignments.)
●
When PRESET is selected in step #1 above, the Rhythm buttons
are used to select the Preset rhythm names printed at the top.
●
When USER is selected, however, these buttons function
according to the User numbers and letters printed at the bottom.
Select the User pattern by pressing one of the numbered buttons
(1-8), then a lettered button (A, B, C, or D) or FILL (for User Fill
In).
MARCH WALTZ SWING BOUNCE SLOW
ROCK
TANGO LATIN 1 LATIN 2 8 BEAT 16 BEAT
USER 1 USER 2 USER 3 USER 4 A B
USER 5 USER 6 USER 7 USER 8 C D
RHYTHM
SEQ. SEQ.
SEQ. SEQ.
1 2
3 4
1
2
MAX
MIN
Press one of these buttons...
...then select SET.
Indicates the pattern at which
the cursor is currently located.
Every User rhythm consists of two
measures. You can program the
rhythm sequence a measure at a time.
If you want to program two-measure
User rhythms, you are required to
enter it twice, for the first measure and
the second measure.
When entered, the first measure is
displayed as positive box
and the
second measure is displayed as
negative box
.
The rhythm patterns can be divided
into four groups: Normal such as
and
, Intro, Fill In and Ending.
When changing the type, for example,
from Normal to Fill In and Fill In to
Normal while programming a rhythm
sequence, the first measure of the
newly selected type will always be
selected and follow. However, when
the same type continues even though
you change the rhythm, for example,
from
to , the second
measure may succeed the sequence.
That means some of the User rhythms
inserted in a rhythm sequence may
begin from its second measure.
To keep this from happening and
begin the newly selected rhythm from
the first measure, insert a different
type, Fill In, before using the new
rhythm pattern.
NOTE:
A maximum of 120 patterns can be
entered to a single sequence.