Yamaha Electone EL-37, Руководство пользователя

Страница: 85 / 108

2.
Select the desired rhythm pattern by pressing the
appropriate button in the panel Rhythm section, then
press the SET button on the panel to enter the pattern.
(Refer to the Rhythm Pattern Number Table below for a
list of the rhythm patterns and their number
assignments.)
When PRESET is selected in step #1 above, the Rhythm buttons are used to
select the Preset rhythm names printed at the top of each button. When USER
is selected, however, these buttons function according to the User numbers
and letters printed at the bottom. Select the User pattern by pressing one of
the numbered buttons (1-8), then a lettered button (A, B, C, or D) or FILL
(for User Fill In).
MARCH WALTZ SWING BOUNCE SLOW
ROCK
TANGO LATIN 1 LATIN 2 8 BEAT 16 BEAT
USER 1 USER 2 USER 3 USER 4 A B
USER 5 USER 6 USER 7 USER 8 C
VOLUME
D
RHYTHM
MAX
MIN
SEQ. SEQ.
SEQ. SEQ.
1 2
3 4
1
2
1) Press one of the rhythm button...
2) ...then select SET.
PATTERN
SEQUENCE
CLEAR CHANGE
PRESET
USER SET INS. DEL. CLEAR
3 3
ACCENT INSTRUMENT QUANTIZE
RHYTHM
PROGRAM
0
0 5 6 7 8
1 2 3 4
83
7. Rhythm Pattern Programming and Rhythm Sequence Programming
When using the Rhythm
Sequence Program, the buttons
on the panel function according
to the indications printed below each
button in green.
NOTE
You can program the rhythm
sequence a measure at a time.
Every user rhythm consists of
two measures. If you want to program
two-measure User rhythms, you are
required to enter it twice, for the first
measure and the second measure.
When entered, the first measure is
displayed normally and the second
measure is displayed with the R in a
negative box at top right corner of the
LCD. (The
indicates that the pattern
number at the current cursor position is
the second measure.)
The rhythm patterns can be divided into
four groups: Normal such as [01] and
[U1A], Intro, Fill In and Ending. When
changing the type, for example, from
Normal to Fill In and Fill In to Normal
while programming a rhythm sequence,
the first measure of the newly selected
type will always be selected and follow.
However, when the same type continues
even though you change the rhythm, for
example, from [06] to [U1Al, the second
measure may succeed the sequence.
That means some of the User rhythms
inserted in a rhythm sequence may
begin from its second measure.
To keep this from happening and begin
the newly selected rhythm from the first
measure, insert a different type, Fill In,
before using the new rhythm pattern.
A maximum of 120 patterns can
be entered to a single
sequence.
NOTE
R