18
2. Voice Sections
3.
Set the volume for each voice section. There are
two volume controls: Coarse and Fine.
Coarse: Use the VOLUME controls of each voice section on the panel to
set the desired level for each voice. The controls have seven volume
settings, from a minimum of 0, or no sound, to a maximum of full
volume.
Fine: Pressing the same panel voice button again calls up the Voice
Condition display.
Use the Data Control buttons that correspond to the Volume setting to
change the level of the desired voice. The relative level is indicated by a
numeric value (from 0 – 24).
4.
Now select voices for the Lower keyboard and
Pedalboard as you did for the Upper keyboard above.
Also set the volumes of the voices.
Playing Lead And Bass Voices from the Lower Keyboard:
The Electone has a special “To Lower” function that lets you assign Lead
or Bass voices to the Lower keyboard. Simply press the TO LOWER
button on the voice section you wish to assign, and that voice will be
playable from the Lower keyboard.
About Voice Section Volumes:
The Upper Keyboard and Lead voices (when not using the “To Lower”
function) sound together in a layer, and the balance of the voices in the
layer is determined by the VOLUME controls of each section. In order to
hear or audition one voice section, set the volume of the other voice
section to the minimum level.
LEAD VOICE
VIOLIN
FLUTE
OBOE
TRUM-
PET
TO
LOWER
VOLUME
MAX
MIN
1
VOLUME
PEDAL VOICE
ELEC.
BASS
CONTRA
BASS
TUBA
ORGAN
BASS
TO
LOWER
MAX
MIN
1
TOUCH=4 VOL.=24
<UPPER> ¡1
Pressing this button decreases the value.
Pressing this button increases the value.
ORGAN
PIANO
GUITAR
VIBRA-
PHONE
COSMIC
TUTTI
STRINGS
BRASS
CLARI-
NET
SAXO-
PHONE
CHORUS
HARMO-
NICA
VOLUME
MAX
MIN
UPPER KEYBOARD VOICE
1
2
Pressing a voice button once
calls up that voice's Voice Menu
display. Pressing it a second
time calls up the Voice Condition
display (as shown in the illustration).
Successive presses alternate between
the two displays.
NOTE
The Lead Voice and Pedal
Voice sounds one note at a
time; when you simultaneously
press two or more keys, only the highest
note will sound.
As for been Upper and Lower keyboard
Voice voices, you can play up to 11
notes simultaneously. (Total polyphonic
capacity is 11 notes at one time.)
NOTE
When the TO LOWER button is
turned on, the Lead voices and
Pedal voices cannot be played
on the Upper keyboard and Pedalboard,
respectively.
Turning the Electone off erases
all panel settings you have
made. When the Electone is
turned on, Basic Registration 1 is
automatically selected.
If you have made panel settings you
wish to keep, save them to Registration
Memory (See page 42) before turning
the Electone off.
You can, however, restore the panel
settings that were made before the
Electone was last turned off. See page
47 for more information.
Содержание Electone EL-37
Страница 1: ......
