Yamaha EGO GEAR Скачать руководство пользователя

Страница: 41 / 86

7-2

Operation and important riding points

EAUN0850

Starting the engine

The sidestand must be up in order for
the ignition circuit cut-off system to en-
able starting (see page 5-15).

WARNING

EWAN0020

Before starting the engine, make
sure that the vehicle is placed on the
centerstand.

NOTICE

ECA10251

See page 7-1 for engine break-in in-
structions prior to operating the ve-
hicle for the first time.

To start the engine

1. Place the vehicle on the center-

stand.

2. Turn the key to “ON”.
3. Apply the front or rear brake.
4. Push the start switch.

Each starting attempt should be
as short as possible to preserve
the battery. Do not crank the en-
gine more than 5 seconds on any
one attempt.

5. When the engine starts, release

the start switch.
If the engine does not start, try
again with the throttle grip open
1/4 turn (10 mm).

NOTICE

ECA11043

For maximum engine life, never ac-
celerate hard when the engine is
cold!

NOTICE

ECAN0072

Do not ride through deep water, oth-
erwise the engine may be damaged.
Avoid puddles because they may be
deeper than expected.

TIP

If the engine will not not start by push
ing the start switch, try using the kick
starter.
The engine will start and the Stop &
Start System is active (see page 4-1)

Содержание EGO GEAR























































































Результаты поиска

Содержание EGO GEAR

Отзывы:

Похожие инструкции для EGO GEAR

Бренды по названию

Популярные бренды

Yamaha EGO GEAR, Руководство пользователя

Результаты поиска

Содержание EGO GEAR

Отзывы:

Похожие инструкции для EGO GEAR

Бренды по названию

Популярные бренды