Yamaha EGO GEAR, Руководство пользователя

Страница: 28 / 86

5-7
5
Instrument and control functions
EAU1234H
Handlebar switches
Left
Right
EAU12401
Dimmer switch “ / ”
Set this switch to “ ” for the high
beam and to “ ” for the low beam.
EAU12461
Turn signal switch “ / ”
To signal a right-hand turn, push this
switch to “ ”. To signal a left-hand
turn, push this switch to “ ”. When
released, the switch returns to the cen-
ter position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
EAU12501
Horn switch “ ”
Press this switch to sound the horn.
EAUM1133
Start switch “ ”
Push this switch while applying the
front or rear brake to crank the engine
with the starter. See page 7-2 for start-
ing instructions prior to starting the en-
gine.
1. Dimmer switch “ / ”
2. Turn signal switch “ / ”
3. Horn switch “ ”
NOTICE
ECA10062
Do not use the hazard lights for an
extended length of time with the en-
gine not running, otherwise the bat-
tery may discharge.
EAU66010
Hazard switch “ ”
With the key in the “ON” position, use
this switch to turn on the hazard lights
(simultaneous flashing of all turn signal
lights).
The hazard lights are used in case of
an emergency or to warn other drivers
when your vehicle is stopped where it
might be a traffic hazard.
1. Stop and Start System switch “ ”
2. Hazard Light switch “ / OFF”
3. Start switch “
”
Stop & Start System switch “ ”
(forEGO GEAR)
A
To on the Stop & Start system push
to the position “ ”. To off the Stop
& Start system push to the position
“ ”.
A
A
A
A
A