Yamaha DVR-S100, Руководство по обслуживанию

Страница: 36 / 144

DVR-S100/NX-SW100
36
DVR-S100/NX-SW100
Description of error Supplementary explanation Faulty point 1 Faulty point 2 Faulty point 3 Faulty point 4
L. H error
U11 Focus error
H01
Tray loading error
H02 Spindle servo error
(Spindle servo, DSC SP motor, CLV servo error)
H03 Traverse servo error
H04
Tracking servo error
H05 Seek error
H06 Power supply error
The power cannot be turned off due to a communication error
between the panel control and the system control.
DSC related error
F500 DSC error
DSC is stopped due to occurrence of a servo error.
(startup, focus error, etc.)
OPU ADSC FEP Servo drive
F501
DSC not ready
Communication error between DSC and system control
(communication failure due to DSC not at work)
ADSC CPU
F502
DSC time out error To be handled in the same way as F500
OPU ADSC FEP Servo drive
F503
DSC communication failure
Communication error (A communication command was
transmitted but an error occurred.)
ADSC FEP EEPROM
F505 DSC Attention Error To be handled in the same way as F500 OPU ADSC FEP Servo drive
F506 Invalid media The disc is upside down, TOC cannot be read, unusable disc Disc FEP ADSC ODC
ODC related error
F600
No control data is obtainable due to a
demodulation error Operation is stopped because the navigation data cannot be
obtained due to a faulty condition of the demodulation system ODC
FEP ADSC
F601
Undefined sector ID is requested.
Operation is stopped due to a request for access by an
abnormal ID data.
ODC FEP ADSC
F602
LEAD-IN is not obtainable due to
demodulation error.
LEAD IN data cannot be read.
F603
KEY DET is not obtainable due to a
demodulation error
The CSS data of the disc cannot be obtained.
F610
ODC abnormal Issuing a command is not permitted.
ODC
F611 6626 QCODE don't read Error No seek address is obtainable in the CD system. ODC
F612 No CRC OK is issued for a certain time. No ID data is obtainable in the DVD system. ODC
F630
No response is provided for the inquiry of
KEY DET.
(Only when used internally)
F631
CPPM KEY DET is not usable until the
end of the file.
The CPPM file system cannot be read due to a scratch, etc. Disc CPPM
F632
CPPM-KEY-DET is not usable. CPPM-KEY-DET is revoked or falsified.
Disc EEPROM CPPM
Disc code
F103 Illegal highlight position
It is highly possible that disc code is violated when displaying
the highlight.
Disc
IIC error
F4FF
Forcible initialization failure (time-out)
EEPROM CPU FEP ADSC
Microprocessor error
F700
MBX overflow
When sending a message back to Disc Manager Firm bug
F701 Message command does not end.
Next message was issued before replying to Disc Manager.
Firm bug
F702 Message command is changed. The message is changed before replying to Disc Manager.
Firm bug
F880 Incorrect task number
When a message comes from non-existing task (error stop,
firm bug correction required)
Firm bug
F890
Message transmission is attempted while
transmitting to AV task A message is being transmitted to AV task (error stop, firm
bug correction, etc.)
Firm bug
F891
A message cannot be transmitted to AV
task. Transmission of a message to AV task is started. (error stop,
firm bug correction required)
Firm bug
F893 FROM is falsified. FROM CPU
F894 EEPROM abnormal
EEPROM
Serial
communication
line
F8A0 Message command is not correct.
Transmission of a message to AV task is started. (error stop,
firm bug correction required)
Firm bug
OPU : Optical Pick Up, DSC : Digital Servo Controller, FEP : Front End Processor, ODC : Optical Disc Controller, FROM : Flash ROM
8. Error Code