2
Minimum System Requirements
n
Depending on your particular operating system, the actual minimum
requirements may be higher than those specified below.
USB MIDI Driver
Computer:
IBM/AT or compatible machine (with USB interface)
OS:
Windows 98/98SE/Me/2000/XP Home Edition/XP Professional
CPU:
Pentium (or Celeron)/166MHz or faster
Available Memory:
32MB or more
Free space in Hard Disk:
2MB or more
n
For information about hardware requirements other than the
application above, refer to the on-line manuals of the relevant
software.
Software Installation
USB MIDI Driver
To operate the DTXTREME IIs from your computer via USB, you’ll
need to install the appropriate driver software.
The USB-MIDI driver is software that transfers MIDI data back and
forth between sequence software and the DTXTREME IIs via a USB
cable.
⇒
Windows 98/Me users
See below.
⇒
Windows 2000/XP users
See page 3.
●
Installing the driver on a Windows 98/Me system
1.
Start the computer.
2.
Insert the included CD-ROM into the CD-ROM drive.
3.
Make sure the POWER switch on the DTXTREME IIs is set to
OFF and use the USB cable to connect the USB terminal of the
computer (or the USB hub) to the USB terminal of the
DTXTREME IIs. When the DTXTREME IIs is turned on, the
computer automatically displays the “Add New Hardware
Wizard.” If the Add New Hardware Wizard does not appear, click
“Add New Hardware” in the Control Panel.
n
For Windows Me users, check the radio button to the left of
“Automatic search for a better driver (Recommended)” and click
[Next]. The system automatically starts searching and installing
the driver. Proceed to Step 8. If the system does not detect the
driver, select “Specify the location of the driver (Advanced)” and
specify the CD-ROM drive’s root directory (e.g., D:\) to install
the driver.
4.
Click [Next].
The window below enables you to select the search method.
5.
Check the radio button to the left of “Search for the best driver
for your device. (Recommended).” Click [Next].
The window below enables you to select a location in which to
install the driver.
6.
Check the “CD-ROM drive” box and uncheck all other items.
Click [Next].
n
The system may ask you to insert a Windows CD-ROM while it
checks for the driver. Specify the USBdrv_ directory of the CD-
ROM drive (such as D:\USBdrv_\) and continue the installation.
n
When using the Windows 98, specify the USBdrv_ directory of
the CD-ROM drive (such as D:\USBdrv_\) and continue the
installation.
Windows 98
Windows Me
DTX2_install_E03.fm Page 2 Tuesday, August 5, 2003 5:08 PM
