E-
18
Adjustment range
OFF/L/ML/MH/H
0 to 16 to 63
STANDARD/RGB/
RGBYCM
–50 to 0 to +50
STANDARD/CINEMA
Input signal
Video/Component,
RGB TV
Video/Component,
RGB TV
Video/Component,
RGB TV, RGB PC
Component,
RGB TV, RGB PC
Video/Component,
RGB TV, RGB PC
Menu Item
SHARPNESS TYPE
Use this parameter to change the filtering characteristics of the circuitry used to sharpen edges
in the projected image.
SHARPNESS GAIN
Adjusts the clearness of the image edges. The higher value creates clearer edges. The lower
value creates a softer image with less noise element.
COLOR BALANCE
S
The default setting displays a good balance of colors, which you cannot change. For RGB, this
parameter adjusts the color balance and gain for the three primary colors R (red), G (green), and
B (Blue). The intermediate colors Y (yellow), C (cyan), and M (magenta) are set automatically
based on the RGB and color temperature settings. From the RGB submenu, press the RESET
key on the remote control to automatically adjust the RGB setting and based on the color gain
and temperature you have just set. For RGBYCM, you should set the color balance and gain for
each color separately. From the RGBYCM submenu, press the RESET key on the remote
control to automatically adjust the RGB or YCM tone and based on the color gain and
temperature you have just set. Refer to the color chart below for further help in adjusting
parameters.
You can change the background color to black by pressing the
key when setting the COLOR
COORDINATE.
LEVEL ADJUSTMENT
S
Adjusts gain and offset for all parameters (Y, C
B
, C
R
/R, G, B) of component and RGB signals.
(except DVI input)
IRIS
IRIS set this parameter to STANDARD for viewing bright images on a large screen. Set it to
CINEMA if you want to give priority to the deep blacks and high contrast important to home
theatre viewing.
XYZ color system color chart
Menu structure
Y
X
Green
Red
Cyan
Yellow
Magenta
Blue
105_DPX-1000(E)16-21
03.2.19, 12:08 PM
18
