background image

1

Read Instructions – All the safety

and operating instructions should be read
before the unit is operated.

2

Retain Instructions – The safety and

operating instructions should be retained
for future reference.

3

Heed Warnings – All warnings on the

unit and in the operating instructions
should be adhered to.

4

Follow Instructions – All operating

and other instructions should be followed.

5

Water and Moisture – The unit

should not be used near water – for
example, near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet
basement, or near a swimming pool, etc.

6

Carts and Stands – The unit should

be used only with a cart or stand that is
recommended by the manufacturer.

6A

A unit and cart

combination should be
moved with care. Quick
stops, excessive force, and
uneven surfaces may
cause the unit and cart combination to
overturn.

7

Wall or Ceiling Mounting – The unit

should be mounted to a wall or ceiling
only as recommended by the
manufacturer.

8

Ventilation – The unit should be

situated so that its location or position
does not interfere with its proper
ventilation.  For example, the unit should
not be situated on a bed, sofa, rug, or
similar surface, that may block the
ventilation openings; or placed in a built-
in installation, such as a bookcase or
cabinet that may impede the flow of air
through the ventilation openings.

9

Heat – The unit should be situated

away from heat sources such as
radiators, stoves, or other appliances that
produce heat.

10

Power Sources – The unit should be

connected to a power supply only of the
type described in the operating
instructions or as marked on the unit.

11

Power-Cord Protection – Power-

supply cords should be routed so that
they are not likely to be walked on or
pinched by items placed upon or against
them, paying particular attention to cords
at plugs, convenience receptacles, and
the point where they exit from the unit.

12

Cleaning – The unit should be

cleaned only as recommended by the
manufacturer.

13

Nonuse Periods – The power cord of

the unit should be unplugged from the
outlet when left unused for a long period
of time.

14

Object and Liquid Entry – Care

should be taken so that objects do not fall
into and liquids are not spilled into the
inside of the unit.

15

Damage Requiring Service – The

unit should be serviced by qualified
service personnel when:

A. The power-supply cord or the plug
has been damaged;
or

B. Objects have fallen, or liquid has
been spilled into the unit; 
or

C. The unit has been exposed to rain;
or

D. The unit does not appear to operate
normally or exhibits a marked change in
performance; 

or

E.

The unit has been dropped, or the

cabinet damaged.

16

Servicing – The user should not

attempt to service the unit beyond those
means described in the operating
instructions.  All other servicing should be
referred to qualified service personnel.

17

Power Lines – An outdoor antenna

should be located away from power lines.

18

Grounding or Polarization –

Precautions should be taken so that the
grounding or polarization is not defeated.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:  TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK), NO USER-SERVICEABLE

PARTS INSIDE, REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert you to the
presence of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.

The exclamation point within an
equilateral triangle is intended to alert
you to the presence of important
operating and maintenance
(servicing)  instructions in the
literature accompanying the
appliance.

• Explanation of Graphical Symbols

CAUTION

WARNING
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.

SAFETY INSTRUCTIONS

Содержание DDP-10
































Отзывы: