CS1D
120
• INC:
Current display value incremented 0.1 (maximum = 99.9)
• Number keys:
The corresponding value is displayed in the first position after the decimal point.
The switches around Selected Output Channel are displayed as numbers on the Channel Select 7-segment display unit.
• SHIFT:
1
• DEC:
Current display value decremented 1 (minimum = 1)
• INC:
Current display value incremented 1 (maximum = 47)
For PC operation elements, the name is displayed on the Channel Select name display unit.
•
:
“UP”
•
:
“LEFT”
•
:
“DOWN”
•
:
“RIGHT”
• -1:
“-1”
• +1:
“+1”
The LCD function access switches are displayed as fixed values on the Selected Channel 7-segment display unit.
• EFF, GEQ, · · · MONI/CUE:
11, 12, · · · 18
• PATCH, INS, · · · CHVIEW (OUTPUT):
21, 22, · · · 28
• PATCH, IN/INS, · · · CHVIEW (INPUT):
31, 32, · · · 38
• SEL switch ·················Each time this switch is pressed, the LED is toggled on/off.
• Other switches ···········If the LED is off, when the switch is pressed it lights up; if the LED is on, when the switch is released, it
goes off.
• Fader ··························The partner of the pair follows.
• PC encoder·················The LEDs around the Selected Output Ch LEVEL encoder are varied.
• Other encoders ··········When the knob is turned, the lighting state changes with the method corresponding to the function type.
*
When carrying out diagnostics checks for single panels, connect OSCPU board CN17 Pins 2 and 4 before starting the
diagnostics.
10-5.
MT Test (Meter Module Inspection)
The STEREO and CUE meters are checked and the surrounding 7-segment LED and name display are checked.
Next, Channels 1-24 are checked one channel at a time, then the check moves from top to bottom along the column. Channels 25-
48 are checked in the same way.
The block number allocation is as follows
STEREO/CUE/TIME-CODE/SCENE NAME
INPUT 1–24
INPUT 25–48
See *1 Items common to all panels.
None
*
For the meter panel, since there are no switches, the mode can not be switched manually. It can be switched with the
PC software.
*
When the mode is set to Mode 3 Operation element check with the PC software, all the LEDs go out.
*
When carrying out diagnostics checks for single panels, connect MTCPU board CN1 Pins 2 and 4 before starting the
diagnostics.
(1) Automatic lighting check mode
(2) All lit check mode
(3) Operation element check mode
Содержание CS1D
