Yamaha CS1D, Руководство по обслуживанию

Страница: 119 / 150

2-1. CS1D-CMU1
(CMU-IC115) Test
Checks around the CMU of CMU1.
Check item
ID CMU [00h]
RAM
• Data Bus
16bit(15-0)
• Address Bus 16bit(16-1)
Flash (Check Sum)
Version
DPM
• CM BUS <-> HI BUS L
• CM BUS <-> TC BUS L
• CM BUS <-> PN BUS L
• CM BUS <-> CN BUS L
Battery
2-2. CS1D-CMU2
(TCU-IC109) Test
Checks around the TCU of CMU2.
Check item
ID TCU [01h]
RAM
• Data Bus
16bit(15-0)
• Address Bus 16bit(16-1)
Flash (Check Sum)
Version
CM BUS <-> TC BUS R
2-3. CS1D-CMU1
(HIF-IC128) Test
Checks around the HIF of CMU1.
Check item
ID HIF [02h]
RAM
• Data Bus
16bit(15-0)
• Address Bus 16bit(16-1)
Flash (Check Sum)
Version
CM BUS <-> HI BUS R
* KB
OK
*
KB
OK
*
Mouse
OK
* Num-Key
OK
1-4. CS1D-PCIF (USER IF) OK
1-4. CS1D-PCIF (USER IF)
Track Pad: OK
KB OK
KB OK
Mouse OK
Num-Key OK
Mouse
(Front):
(Rear):
(Rear):
(Rear):
(Front): OK
*
Track Pad
OK
* Mouse
(Front)
(Rear)
(Rear)
(Rear)
(Front)
OK
Left click the left horizontal with the pad on this device.
Right click the right horizontal .
TRACK PAD L R
···
Connect the keyboard and press 1 2 3.
FRONT KEY BOARD
···
Press 1 2 3 with the keyboard connected to the rear.
REAR KEY BOARD
···
Use the keypad connected to the back and press any number from 0 to 9.
REAR NUM KEY
···
Left click or Right click the with the mouse connected on the front.
FRONT MOUSE
···
Left click or Right click the with the mouse connected on the rear.
REAR MOUSE
···
This message asks you to change the connections, so change the connections, then press OK.
Please connect [KB, and Mouse] to rear ports.
OK
Character strings like those on the right are displayed on the CS1D LCD. When each
character string appears, work according to the instructions on the right. If the response is
correct, the test result is OK. Note that if you do not operate for a while, the test times out.
CS1D
110
1-4. CS1D-PCIF (USER IF) Test
This test checks around the PCIF user interface.
2. CS1D-CMU Test
Checks CMU1 and CMU2. The items below are checked, but all these checks except the battery check are equivalent to inspections
described elsewhere in this document, so the next pages explain only 2-1 in detail.