Yamaha CS-700 Series, Руководство по эксплуатации

Страница: 85 / 109

85
cam-apply-defaults
Description:
Apply the camera's default PTZ settings. These settings are also automatically applied when
the device detects that the upstream USB connection has been established, either at
startup or after a USB disconnection.
Command Definition:
Action Definition
execute
cam-apply-defaults
Parameters:
None
Format Examples:
cam-apply-defaults
Supported Products: CS700-AV, CS700-SP, CS700-DL, CS700-DS
status
Description:
Query a call status.
Property Actions:
get, notify
Command Definition:
Action Definition
get
get status <1..3|usb|bt>
response
val status <1..3|usb|bt> <"call-status">
notify
notify call.status <1..3|usb|bt> <"call-status">
Parameters:
Parameter Description
1 VoIP line 1
2 VoIP line 2
3 VoIP line 3 (used for transfer)
usb USB line
bt
Bluetooth line
call-status
String as shown below for each call type.
VoIP Calls
idle Initialization state.
incoming Receiving incoming VoIP call.
calling Initiating outgoing VoIP call.
failed Outgoing call attempt failed; it is followed by “disconnected” when the attempt is
disconnected.
connected Call is connected.
onhold Call is on hold.
connected-in-
conf Call is in a conference.