63
Property
Type
Values
Default Value
Description
sys.power-saving-
mode
BOOLEAN
0 : Power save mode is off
(default)
1 : Power save mode is on
0
Configure power saving mode setting, 0 - off, 1 - on. Default is off.
sys.power-saving-
time
NUMBER
timeout : Power save timeout in
minutes
20
Configure power saving time in minutes. Default is 20 minutes.
sys.provisioning-
interval
NUMBER
1-44640 : Provisioning interval in
minutes
1440
Specify the provisioning interval for the device, in minutes. The
default value is 1440 (1 day), and the maximum interval is 44640
(31 days).
sys.snmp-enable
BOOLEAN
0 : Disable SNMP (default)
1 : Enable SNMP
0
Enable or disable SNMP support. Disabled (0) means that SNMP is
not supported. Enabled (1) means that SNMP is available. Default
is 0.
sys.snmp-
community
TEXT
Read-only community string.
public
Specifies the SNMP read-only community string used for queries
from the server and transmitted traps. Read-only indicates the
authorization level. The device does not support write operations
initiated through SNMP.
sys.snmp-contact-
name
TEXT
Contact name.
Specifies the contact name, typically the system administrator.
This string is informational and can include an email address. It is
not associated with traps.
sys.snmp-device-
location
TEXT
Device location.
Specifies the location of the device for informational purposes.
sys.snmp-address
TEXT
IP address or DNS name.
Specifies SNMP server address to which traps will be sent. Leave
blank to disable traps.
sys.upgrade-mode
OPTION
usb : Upgrade over USB only
ip : Upgrade over IP connection
only
all : Upgrade over USB or IP
all
Specifies the type of upgrade that is supported.
sys.dialer-
connection-mode
TEXT
ble : Connect vie BLE (default)
usb : Connect via USB
ble
Specifies the type of connection the tablet or dialer makes with the
base. Options are BLE or USB.
audio.eq
NUMBER
1 : Voice (default)
2 : Bass boost
3 : Treble boost
1
EQ setting used to adjust the speaker frequencies to your
preference for the room and the types of calls.
Содержание CS-700 Series
