Firmware Update Procedure for
CRX-N560/N560D (MCR-N560/MCR-N560D)
note:
DO NOT
interrupt the power or press any buttons during the update.
In case the power is accidentally cut off, the network player will restore original
firmware. Perform the update procedure from STEP 1 again.
Update is completed when “
Update success.
”, “
Please…
”, “
power off!
” is
displayed alternately. Then, power off the unit.
STEP 3
Confirm updated firmware version
Power on and press the
OPTION
button on the remote control and select
“
System Config
” using the
UP/DOWN
buttons. Press
ENTER
and select “
Firm
Version
” accordingly. Press
ENTER
again to confirm that the firmware version has
been updated.
(X
(XX.XX shows actual firmware version.)
Congratulations!
You have completed the firmware update. Your player is ready for normal use.
[ 2. Firmware Update by USB ]
Requirements:
・
USB thumb drive, with enough free space to store the firmware.
（
File system with FAT16 or FAT32 format
）
・
Firmware file provided by Yamaha.
STEP 1
Insert the USB thumb drive on the front panel.
STEP 2
Power on the unit and enter option settings
Press
OPTION
button on the remote control.
STEP 3
Start Update
Using the
UP/DOWN
buttons, select menu “
System Config
”
and press
ENTER
button. After that, select “
Firm Update
” using
UP/DOWN
buttons and press
Enter
button.
ENTER
OPTION
UP
DOWN
X
XX.XX
