Operation
20
The
CRW2200UX
drive can be connected or disconnected to or from your computer
at any time whether the computer is turned on or off (hot swapping).
When removing the
CRW2200UX
drive with the computer turned on, or when
turning off the drive with the computer connected, follow the procedure below.
1
1
1
1
Exit the writing software.
2
2
2
2
Be sure to remove any disc from the disc tray.
3
3
3
3
For Windows 98 Second Edition, remove the drive.
For Windows Me/2000 Professional, start the “Unplug or Eject
Hardware” on the Windows taskbar and perform the necessary steps to
remove the drive.
* Screen displayed in Windows Me environment.
Note
When writing, be sure not to disconnect the USB cable or any USB devices from the drive, and do
not connect any USB devices either.
Disconnecting the
CRW2200UX
Drive