Yamaha CRW2100S - CRW - CD-RW Drive, Руководство пользователя

Страница: 16 / 53

Front and Rear of Unit
7
Rear Panel
The CRW2100S drive’s rear panel features the following:
AUDIO OUT
R L G
ID SELECT
PARITY
TERMINATOR
BLOCK SIZE
1 2 4
+5V
DC INPUT
G
+12V
1
SCSI
INTERFACE
CONNECTOR
1 2 4
ID SELECT.......
PARITY..............
TERMINATOR..
BLOCK SIZE....
1
2
3
4
AUDIO OUT connector
Connect one end of the 4-pin
audio cable to this and the
other end to your computer’s
sound card or built-in audio.
(P. 19, 27)
DC INPUT connector
Insert the power connector
from your computer’s
power supply in this socket
to feed power to the drive.
(P. 20, 28)
SCSI INTERFACE connector
Insert the connector of the SCSI ribbon cable here.
Make sure you align the red line of the ribbon cable with
pin 1 of the drive’s connector, marked “SCSI
INTERFACE CONNECTOR 1.” (P. 18, 26)
1
ID SELECT jumper switches
Set these switches using black plastic
shunts in order to manually assign a SCSI ID
number for the drive.
2
PARITY jumper switch
Set this switch using a black plastic shunt in
order to enable parity checking.
3
TERMINATOR jumper switch
Set this switch using a black plastic shunt in
order to enable the drive’s built-in SCSI
termination.
4
BLOCK SIZE jumper switch
Set this switch using a black plastic shunt in
order to set the block size to 512 bytes per
sector.