9
Mixing Console – Editing the V
o
lume
and T
ona
l B
a
lance
–
CVP-601 Reference Manual
71
Mixing Console
– Editing the Volume and Tonal Balance –
Contents
• Adjusting Panning/Volume for Each Part
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
• Changing the Voice for Each Part
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
• Selecting an Effect Type for Each Block
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
• Editing and Saving the Selected Master EQ
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
The MIXING CONSOLE display called up via the [MIXING CONSOLE] button consists of five pages of
parameters. Use the TAB [
L
]/[
R
] buttons to call up the desired page, and set various parameters for each
part to adjust the balance between parts and create your desired sound. Note that the Save operation for your
settings will differ depending on the part. For instructions, refer to the Owner’s Manual.
Adjusting Panning/Volume for Each Part
1
Press the [D] (or [I]) button to select the PANPOT parameter or press the [E] (or [J])
button to select the VOLUME parameter.
2
Use the [1
] – [8
] buttons to adjust panning/volume for the desired part.
NOTE
When the display for SONG CH 1-8 or SONG CH 9-16 is selected, you can switch between the two by pressing the [A] (PART) button.
3
Save your settings.
Refer to the Owner’s Manual, chapter 9.
Editing VOL/VOICE Parameters
PANPOT
VOLUME