CVP-601 Reference Manual
73
Mixing Console – Editing the V
o
lume
and T
ona
l B
a
lance
–
9
Editing FILTER Parameters
[A]
PART
This will be displayed only if SONG CH 1-8 or SONG CH 9-16 is selected
for the part. Toggles between the two channel displays: SONG CH 1-8 and
SONG CH 9-16. For details, refer to chapter 9 in the Owner’s Manual.
[D]/[I]
HARMONIC
CONTENT
Allows you to adjust the resonance effect (
) for each part.
[E]/[J]
BRIGHTNESS
Determines the brightness of the sound for each part by adjusting the cut-
off frequency (
).
Editing TUNE Parameters
[A]/[B]/
[F]/[G]
PORTAMENTO
TIME
Portamento is a function that creates a smooth transition in pitch from the
first note played on the keyboard to the next. The Portamento Time deter-
mines the pitch transition time. Higher values result in a longer pitch
change time. Setting this to “0” results in no effect. This parameter is
available when the selected keyboard part is set to Mono.
[C]/[H]
PITCH BEND
RANGE
Determines the range of the PITCH BEND for each keyboard part (when
a pedal is assigned to this function;
). The range is from “0” to
“12” with each step corresponding to one semitone.
[D]/[I]
OCTAVE
Determines the range of the pitch change in octaves, over two octaves up
or down for each keyboard part.
[E]/[J]
TUNING
Determines the pitch of each keyboard part.
[1
] –
[3
]
TRANSPOSE
Allows you to set transposition for overall sound of the instrument
(MASTER), Song playback (SONG), or the keyboard pitch (KBD),
respectively.
