74
CVP-601 Reference Manual
Mixing Console – Editing the V
o
lume a
n
d T
onal B
a
lance –
9
This instrument has an effect system featuring six separate blocks (Reverb, Chorus and DSP1-4). For each
block, you can assign the desired effect type individually. The effects are applied independently for each part
or globally for the entire sound according to the blocks: the effects of Reverb and Chorus blocks are applied
to all of the parts input to the Mixing Console, DSP1 is applied only to the Style and Song sounds (or applied
to a specific part of the Style or Song depending on the setting), and DSP2-4 are applied to the specific
keyboard parts and Song parts. Use these instructions to set up various effects for blocks and parts to enhance
the sound as desired.
Selecting an Effect Type for Each Block
NOTE
When the display for SONG CH 1-8 or SONG CH 9-16 is selected, you can switch between the two by pressing the [A] (PART) button.
1
Press the [F] (TYPE) button in the EFFECT Page of the Mixing Console display.
The Effect Type Selection display is called up.
2
Use the [1
]/[2
] buttons to select the effect BLOCK.
Editing EFFECT Parameters
Effect
Block
Applicable parts
Effect characteristics
REVERB
All parts
Reproduces the warm ambience of playing in a concert hall or jazz
club.
CHORUS
All parts
Produces a rich, “fat” sound as if several identical instruments are being
played simultaneously. In addition, other type effects (such as reverb,
delay, etc.) can also be selected in this effect block.
DSP1
STYLE PART,
SONG
CHANNEL 1-16
This effect is applied only to Style/Song parts. When the “Connection”
parameter selected in step 3 of “Creating an Original Effect” section
(on
) is set to “System,” the DSP1 effect will be applied overall
to the Style and Song. When it is set to “Insertion,” the DSP1 effect will
be applied to a specific part of the Style or Song.
DSP2-4
RIGHT 1,
RIGHT 2, LEFT,
SONG
CHANNEL 1-16
For each of DSP2-4, you can select one of the parts or channels listed at
left. When you select “RIGHT2” for DSP2, for example, the DSP2
Effect is applied only to the Right 2 part. Note that if you select a Song
or Style which requires the DSP2-4 Blocks, the part assignment of
these three Blocks will be changed automatically with last priority
according to the data.
2
3
4
5
