13.
Key Cover Assembly
(Time required: About 10 minutes)
13-1
Close the key cover.
13-2
Remove the top board assembly. (See procedure 9.)
13-3
Remove the screw marked [27A]. The rack cover (L) can
then be removed. (Fig. 13)
*
The rack cover (R) can then be removed in the same manner.
13-4
Set the left end of the rod at the slits of the guide and then
lift the rear key cover assembly. (Fig. 14)
13-5
Lean slightly the key cover assembly so that the guide pin
can be removed from the guide rail. (Fig. 15)
*
When removing, be sure not to make scratches on the side
cover.
*
When reinstalling the key cover assembly, apply a
masking shield tape around the guide rail to prevent from
making scratches on the assembly.
14.
Panel Assembly
(Time required: About 15 minutes)
14-1
Remove the top board assembly. (See procedure 9.)
14-2
Remove the key cover assembly. (See procedure 13.)
14-3
Remove the six (6) screws marked [111]. The panel
assembly can then be removed. (Fig. 10)
[1B]: Bind Head Tapping Screw-B 4.0x8 MFZN2Y (EP640410)
[2A]: Bind Head Tapping Screw-B 3.0x10 MFZN2Y (EP600220)
[3D]: Bind Head Tapping Screw-B 3.0x16 MFZN2Y (EP600390)
Fig. 11
Fig. 12
PK-LF cable
• MA60 Assembly
[1B]
[2A] [2A]
[3D] [2A]
[2A]
[1B]
[1B]
MA60
CVP-205/CVP-205M
14
11.
PEDAL (D-JACK) Circuit Board
(Time required: About 10 minutes)
11-1
Remove the back board assembly. (See procedure 4.)
11-2
Disconnect the PK-LF cable. (Fig. 11)
11-3
Remove the PK connector assembly. (See procedure 10.)
11-4
Remove the two (2) screws marked [35c]. The PEDAL (D-
JACK) circuit board can then be removed. (Fig. 1, Fig. 10)
12.
MA60 Circuit Board
(Time required: About 15 minutes)
12-1
Remove the MA60 assembly. (See procedure 10.)
12-2
Remove the five (5) screws marked [1B], the four (4)
screws marked [2A] and the screw marked [3D]. The
MA60 circuit board can then be removed. (Fig. 12)
Содержание Clavinova CVP-205
