manualshive.com logo in svg

Yamaha Clavinova CLP-955, Руководство по обслуживанию

Поделиться
Скачать
Yamaha Clavinova CLP-955 Скачать руководство пользователя страница 8

CLP-955

8

■

 DISASSEMBLY PROCEDURE

1.

Speaker Grill Assembly and Top Board (Small) Assembly

1-1. Put up and set the music stand.  (Fig. 1)
1-2

Open the top board (big) assembly and remove the
speaker grille assembly.  (Fig. 1)

1-3

Remove the five (5) screws marked [89] with the top
board (big) assembly open.  Then raise the lid stay and
carefully lower the top board (big) assembly so the lid
stay tip comes into the recess in the top board (big)
assembly; then, fix the top board (big) assembly.

1-4

Hold up the top board (small) assembly while pulling
it toward you and remove the top board (small)
assembly.  (Fig. 1)

 (Notes)

When opening closing the top board (big) assembly,
be careful not to allow your fingers to be pinched.
Take care not to open the top board (big) assembly too
far.  If it is, excessive load may be applied to its attaching
locations with the resultant damage there.
When removing the top board (small) assembly, make
sure that the keyboard cover is kept closed.  If the top
board (small) is removed with the keyboard cover open,
the cover may be damaged.

[89]

[89]

Recess

Lid stay

Top board assembly(big)

Speaker grille assembly

Top board assembly(small)

[89]:

Truss Head Screw 3.0 

×

 25 MFZN2BL (V669600)

(Fig. 1)

Содержание Clavinova CLP-955


























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды