CLP-955
18
Spring
Hook
Stopper L88
Hammer white key
Stopper L88
Hammer white key
Cat
Frame
Spring
Frame
Hook
Upper side
[D]
[E]
Spring
Key guide
White key
(Fig. 22)
(Fig. 23)
(Fig. 24)
(Fig. 25)
(Fig. 26)
[B]
[A]
[C]
Spring
Round
(Rod: TX00670)
White key
(Fig. 21)
27. Reassembling the GH Keyboard Assembly
27-1 Hammer white key (hammer black key)
Insert the hammer white (black) key into the frame on
the back of the GH key board assembly and attach the
stopper L88. (Fig. 24)
27-2 Spring
With the GH key board assembly on the top side, align
the two branching ends of the spring with the cut in the
hammer white (black) key. Push down these ends once
and then fasten them on the frame hook. (Fig. 25)
*
Take care of the direction of the spring.
27-3 White (black) key
Add the white (black) key to the [E] part and key guide
and make sure that the spring is securely in the recess
on the inside of the key board fulcrum. Then fasten the
white (black) key while slowly pushing down the upper
[D] part. (Fig. 26)
27-4 AEXL-88L circuit board
Fasten the AEXL-88L circuit board using the seven (7)
screws marked [260A]. (Fig. 19)
27-5 AEXL-88H circuit board
Fasten the AEXL-88H circuit board using the seven (7)
screws marked [260B]. (Fig. 19)
*
When attaching the rubber contact point, check that the
slit mark on the back of the frame and the slit in the
rubber contact point are in alignment.
