50
CLP-955
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
2
X
Attach the pedal box (B).
Before attaching the pedal box, remove the vinyl tie holding
the pedal cord to the base plate then connect the pedal cord. Pull
the pedal plug out from the hole in the base plate and plug it into
the PEDAL jack in the bottom of the main unit with the flat side
of the plug facing the keyboard side of the main unit (refer to the
illustration). If the plug won’t go in properly, do not force it ...
check the plug orientation and try again.
Making sure that the pedal cord doesn’t get caught between
the base plate and main unit, carefully lower the pedal box
assembly onto the bottom of the main unit and line up the screw
holes. Finally, attach the pedal box with four 5
x
20 mm screws
4
.
B
Rear Side
Keyboard Side
5 x 20mm screws
4
Remove the vinyl tie.
