49
CLP-955
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
1
A
A
Make sure that when the legs are attached
that the legs are fitted to the rectangular
pipe’s rounded edge.
A
10 x 60mm bolt
1
Spring Washer
2
Washer
3
When attaching the legs, make sure to tighten each bolt using the supplied
wrench until there remains no gap between the washer, spring washer and the
bolt. As you tighten the bolt, occasionally shake the leg to remove any looseness
between the pipes and the leg.
A
Rectangular Pipe
Z
Attach the three legs (A).
Use scissors or a cutter to remove the packing material in
which the main unit is wrapped. Then attach the legs to the bot-
tom of the main unit using one 10
x
60mm bolt
1
per leg. The
legs (A) are identical so they can be used at any position on the
unit however, please pay close attention to the illustration and
ensure that the legs are properly fitted to the rectangular pipe’s
rounded edge.
