Yamaha Clavinova CLP-157, Руководство пользователя

Страница: 14 / 39

9
ROOM ........
This setting add a continuous reverb effect to the sound that is similar to the type of
acoustic reverberation you would hear in a medium-size room.
HALL 1 ...... For a “bigger” reverb sound, use the HALL 1 setting. This effect simulates the natu-
ral reverberation of a medium-size concert hall.
HALL 2 ......
For a really spacious reverb sound, use the HALL 2 setting. This effect simulates the
natural reverberation of a large concert hall.
COSMIC .... The COSMIC reverb effect produces an echo-plus-reverb sound that can add life and
animation to your music.
Reverb
The [REVERB] button selects a number of digital reverb effects that you can use for
extra depth and expressive power.
To select a reverb type press the [REVERB] button a few times until the indicator
corresponding to the desired type lights (the indicators light in sequence each time the
[REVERB] button is pressed). No reverb is produced when all indicators are off.
The depth of the selected reverb effect can be adjusted for the current
voice (separate settings can be made for each voice) by using the C2
through C4 keys on the keyboard or the TEMPO [
s
] and [
t
] buttons
while holding the [REVERB] button. The selected reverb depth value (0 …
15) will be shown on the TEMPO display until the [REVERB] button is
released. The default reverb depth settings are given in the “Default Set-
tings” chart below.
When using the keyboard, the C3 keys sets the “normal” depth (a setting
of “8”). Keys to the left of C3 decrease the reverb depth, and keys to the
right of C3 increase the reverb depth.
When using the TEMPO buttons the first time either button is pressed
the current depth setting appears on the TEMPO display, then pressing the
[
s s s s s
] button increases the reverb depth while the [
t t t t t
] button decreases the
reverb depth. Press both the [
s
] and [
t
] buttons simultaneously to in-
stantly recall the normal (“8”) setting.
■
A setting of “0” sets the minimum reverb depth (no reverb).
■
A setting of “8” sets medium “normal” reverb depth.
■
A setting of “15” sets the maximum reverb depth.
NOTE
• Hold either the TEMPO [
s
] or [
t
] button for continuous scrolling in the
specified direction.
• A setting of “1” cannot be entered via the keyboard.
●
Adjusting Reverb Depth
Normal
depth.
Decrease
depth. Increase
depth.
C
3
C
2
C
4
REVERB
ROOM
HALL 1
HALL 2
COSMIC
0 2 3 4 5 6 7 8 9 10 11 12 13 14 15
TEMPO
▲
▼
8
ROOM HALL 1 HALL 2 COSMIC
STRINGS, ORGAN 8 (C3) 8 (C3) 11 (F3) 10 (E3)
Default Settings
* All effect types set to C3 for all other voices.
* The default reverb type is ROOM.
Press the C7 key while holding the [REVERB] button to memorize the
current effect type and all depth settings made since the power was turned
on. The memorized settings will be retained in memory for about one week
after the power is turned off, then the default settings will be restored. To
keep the memorized settings for longer periods, turn the power on briefly at
least once a week.
If these settings are not memorized as described above, they are retained
in memory only until the Clavinova is turned off.
●
Memorizing the Reverb
Type & Depth Settings
C
7
REVERB
ROOM
HALL 1
HALL 2
COSMIC