16
Connections
Connecting external
AV components
75
Ω
UNBAL
FM
ANT
SYSTEM
CONNECTOR
PCM/DTS
q
DIGITAL
GND
AM
ANT
VIDEO OUT (DVD ONLY)
S VIDEO
VIDEO
TV IN
AUX IN
LINE OUT
COMPONENT
TO NX-SW300
DIGITAL IN
COAXIAL
2 4
1
3
VCR or
Cassette Deck
Viewing and listening to playback
1
Connect the VCR or cassette deck to the TV as
shown.
2
Connect the DVD receiver’s AUX IN to the
AUDIO OUT jacks on the VCR or cassette deck.
Before starting operation, press AUX to select
“
AUX ANALOG
” in order to activate the input
source.
Using the VCR for recording DVD
playback
Some DVDs are copy-protected. You cannot
record or dub protected discs using a VCR.
3
Connect the DVD receiver’s S VIDEO output to
the S-VIDEO IN jack on the VCR.
4
Connect the DVD receiver’s LINE OUT to the
AUDIO IN jacks on the VCR.
This will allow you to make analog stereo (two
channels, right and left) recordings.
If you connect external AV equipment such as a VCR, cassette deck or digital audio component to the
following AV jacks on the DVD receiver, you can enjoy those AV sources with the DVD receiver. Also, you can
record AV sources played on the DVD receiver using the recording equipment. This section provides some
examples of other AV equipment connections. For information on your AV equipment, refer to the manual for
it.
Connecting a VCR or Cassette Deck
DVD Receiver
TV