14
Connections
IMPORTANT!
– Progressive scan video quality is only
available when using Y P
B
P
R
in conjunction
with a progressive scan TV.
Using component video output
(Y PB PR)
1
Use the component video cables
(red/blue / green - not supplied) to connect the
DVD receiver’s Y P
B
P
R
jacks to the corresponding
component video input jacks (or Y Pb/Cb Pr /Cr/
YUV jacks) on the TV.
2
Activate the progressive scan function
(see “Progressive function-(on/off)” on page 32).
Connecting a progressive scan
TV
Placing the speakers and
subwoofer
For the best possible surround sound, all of the
speakers (except the subwoofer) should be placed
at the same distance from the listening position.
1
Place the front left and right speakers at equal
distances from the TV.
2
Place the center speaker above the TV so that the
center channel’s sound is localized.
3
Place the surround speakers at normal listening ear
level facing each other or hang on the wall.
4
Place the subwoofer on the floor near the TV.
Notes:
– To avoid magnetic interference, do not position the
front speakers too close to your TV.
– Allow adequate ventilation around the DVD receiver
and subwoofer.
Surround
Speaker
(Left)
1
1
2
3
4
3
Front Speaker
(Left)
Front Speaker
(Right)
Subwoofer
Surround
Speaker
(Right)
DVD Receiver
Center speaker
75W UNBAL
FM
ANT
SYSTEM
CONNECTOR
PCM/DTS
q
DIGITAL
GND
AM
ANT
VIDEO OUT (DVD ONLY)
S VIDEO
VIDEO
TV IN
AUX IN
LINE OUT
COMPONENT
TO NX-SW300
DIGITAL IN
COAXIAL
DVD Receiver
TV