manualshive.com logo in svg

Yamaha BANSHEE YFZ350S, Руководство пользователя

Поделиться
Скачать
Yamaha BANSHEE YFZ350S Скачать руководство пользователя страница 5

EBU00011

IMPORTANT NOTICE

This machine is designed and manufactured for OFF-ROAD use only. It is illegal and unsafe to
operate this machine on any public street, road or highway.
This machine complies with all applicable OFF-ROAD noise level and spark arrester laws and
regulations in effect at the time of manufacture.
Please check your local riding laws and regulations before operating this machine.

AFFIX DEALER

LABEL HERE 

EBU13330

YFZ350S

OWNER’S MANUAL

©

2003 by Yamaha Motor Corporation, 

U.S.A.

1st edition, 2003

All rights reserved.

Any reprinting or unauthorized use

without the written permission

of Yamaha Motor Corporation, U.S.A.

is expressly prohibited.

Printed in Japan.

P/N LIT-11626-17-04

 5FK-9-16-01  3/13/03 11:13 AM  Page 3

Содержание BANSHEE YFZ350S













































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды