manualshive.com logo in svg

Yamaha BANSHEE YFZ350S, Руководство пользователя

Поделиться
Скачать
Yamaha BANSHEE YFZ350S Скачать руководство пользователя страница 105

The service information included in this manual

is intended to provide you, the owner, with the

necessary information for completing your own

preventive maintenance and minor repairs. The

tools provided in the owner’s tool kit are suffi-

cient for this purpose, except that a torque

wrench is also necessary to properly tighten

nuts and bolts.

NOTE:

If you do not have a torque wrench available

during a service operation requiring one, take

your machine to a Yamaha dealer to check the

torque settings and adjust them as necessary.

8-2

POTENTIAL HAZARD

Operating this ATV with improper modi-
fications.

WHAT CAN HAPPEN

Improper installation of accessories or
modification of this vehicle may cause
changes in handling which in some situ-
ations could lead to an accident.

HOW TO AVOID THE HAZARD

Never modify this ATV through improper
installation or use of accessories. All
parts and accessories added to this
vehicle should be genuine Yamaha or
equivalent components designed for
use on this ATV and should be installed
and used according to instructions. If
you have questions, consult an autho-
rized Yamaha ATV dealer.

q

WARNING

8

 5FK-9-16-03  3/13/03 8:39 AM  Page 3

Содержание BANSHEE YFZ350S













































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды