manualshive.com logo in svg

Yamaha BANSHEE YFZ350S, Руководство пользователя

Поделиться
Скачать
Yamaha BANSHEE YFZ350S Скачать руководство пользователя страница 18

2-6

POTENTIAL HAZARD

Improper handling of gasoline.

WHAT CAN HAPPEN

Gasoline can catch fire and you could
be burned.

HOW TO AVOID THE HAZARD

Always turn off the engine when refuel-
ing.
Do not refuel right after the engine has
been running and is still very hot.
Do not spill gasoline on the engine or
exhaust pipe/muffler when refueling.
Never refuel while smoking, or while in
the vicinity of sparks, open flames, or
other sources of ignition such as the
pilot lights of water heaters and clothes
dryers.

q

WARNING

When transporting the ATV in another
vehicle, be sure it is kept upright and
that the fuel cock is in the “OFF” posi-
tion. Otherwise, fuel may leak out of the
carburetor or fuel tank.

WHAT CAN HAPPEN

Gasoline is poisonous and can cause
injuries.

HOW TO AVOID THE HAZARD

If you should swallow some gasoline or
inhale a lot of gasoline vapor, or get
some gasoline in your eyes, see your
doctor immediately.
If gasoline spills on your skin, wash with
soap and water. If gasoline spills on
your clothing, change your clothes.

 5FK-9-16-01  3/13/03 11:13 AM  Page 16

Содержание BANSHEE YFZ350S













































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды