Yamaha AW2400, Руководство по обслуживанию

Страница: 76 / 172

AW2400
76
(2) Mounting/Unmounting test of the internal HDD to a PC.
(A) When the following display is shown, connect the
USB to the PC.
(B) See “My Computer” on the PC and check that the 2
HDDs internal to the AW2400 (AW2400-1, and
AW2400-2) are mounted.
(C) Double-click on the “Safe removal of hardware” in
the task tray of the Windows (around right bottom of
the desktop screen) to unmount the HDD of the
AW2400 (shown as “USB high-capacity memory
device”) .
q
When the following display appears, click “STOP”.
w
Check that “USB high-capacity memory device”
is selected, and click “OK”.
e
Check that no device is shown, and click “Close”.
(D) Remove the USB cable from the PC and input the test
results when the following display appears on the LCD
of the AW2400. (It may take several seconds until
displayed.)
If the test result is:
• normal, press the [ENTER] key to complete.
• NG, press the [CANCEL] key to end.
4-7-3 Judgment
(1) If normal:
The screen returns to the testing item indication, “
™
” is
displayed at the left end of testing item indicating area,
and the cursor moves to the next testing item.
(2) If the test result is NG or you wish to cancel the test:
Press the [CANCEL] key to return to the testing item
indication screen. At this time, “
×
” is shown at the left end
of testing item indicating area.
If there is any abnormality, error messages are displayed
in the message indication area.
(3) If “
USB Circuit Error : CPU <=> M66590
Register
” is displayed during the test.
There is abnormality in the REGISTER circuit.
*** 07. USB ***
Connect USB!
Check HDD mount on PC.
Then HDD unmount and disconnect USB.
EXIT : [CANCEL]
*** 07. USB ***
USB TEST OK?
OK : [ENTER], NG : [CANCEL]