Function
Configures the functions that make the unit easier to use.
Note
Default settings are underlined.
n
Input Rename
Changes the input source name displayed on the front display. You can also select a
name created by the Auto Rename function.
Input sources
HDMI 1-4, AV 1-3, AUX, AUDIO 1-
3
, TUNER, MusicCast Link, SERVER, NET RADIO,
Bluetooth, USB
Default
HDMI 1-4: Auto
Others: Manual (For AUX,
AUDIO3,
TUNER, MusicCast Link, SERVER, NET RADIO,
Bluetooth,
USB only “Manual” can be selected.)
Procedure to rename automatically
1
Use the cursor keys (
q
/
w
) to select an input source to be
renamed.
2
Use the cursor keys (
e
/
r
) to select “Auto”.
The unit creates a name automatically according to the connected
device.
3
To change another input source, repeat steps 1 to 2.
4
To exit from the menu, press SETUP.
Note
During selecting Auto , the created name is saved even after the device connection is terminated. To
reset to the default setting, switch the setting to Manual at once and then set it again to Auto .
Procedure to rename manually
1
Use the cursor keys (
q
/
w
) to select an input source to be
renamed.
2
Use the cursor keys (
e
/
r
) to select “Manual” and press
ENTER.
The edit screen is displayed.
3
Use the cursor keys and ENTER key to edit the name, and then
select “OK” and press ENTER.
Note
▪ To cancel the entry, select CANCEL .
▪ If you select "RESET", the default input name will be inserted into the editing area.
4
To change another input source name, repeat steps 1 to 4.
5
To exit from the menu, press SETUP.
En
105
